Why is Robotic Screw driving machine?
To give better in term of quality such as same read out trace torque for each point of production. Higher efficiency by reducing manpower at least one to three person.
What are the feeding types for the Robotic Screw Driving System?
We using the vibrator to sort the screw depending on screw type and size. Firstly we using the pick and place of the screw presenter. Another way is we using air blowing to feed directly to the screwdriver.
How to apply the screw to the product?
Mainly, we have 2 ways to screw the product which is magnetic for ferrous screw and vacuum for all material including ferrous, copper, stainless steel screw.
What kind of screws are fit for the air blowing type machine?
Screw models M1.4~ M4 are fit for air blowing feeding of screw driving machine. Screw length must less than 16mm. If more than, the feeder needs to be customized. The screw's length must be over 1.2 times of diameter for air blowing feeding type to prevent the screw from turn over inside the feeder's tube.
What kind of screws are fit for the screw presenter type machine?
Screw models M0.8 ~ M4 are fit for Magnetic, vacuum feeding of screw driving machine. Machine screws, self-tapping screws, etc.
When does the machine have multiple electric screwdrivers?
For high efficiency, we offer dual screwdriver for simultaneously fastening for the product in array position.
What does an electric screwdriver the machine use?
Currently, we are using the electric screwdriver from Kilews, Sudong, DEPRAG, DESOUTTER, MOUNTZTORQUE, HIOS, and Atlas.
What is the range of the tapped hole's depth on the products?
The range is about 20mm, depending on customer product and must be magnetic screw type.
What is the common problem during the fastening process?
There are five common problems could occur throughout the process such as misalignment entry, broken screw, damaged thread, missing part and floating screw.
What are the differences between SC-2 and GW-4 ?
GW using gravity to transfer the screw to the nozzle and push to release the screw. The screwdriver nozzle contacted with the product surface and it is likely to slightly damage the surface. SC-2 using air blowing to transfer the screw to the nozzle and push button to release the screw.